Peen marking on metal

Benchtop Pneumatic Dot Peen Engraver

The most common marking needs of our desktop pneumatic dot peen marker customers are nameplates on machinery and equipment, as well as some automotive brands where VINs are marked on a separate steel plate and attached to the chassis. For these applications, we have developed desktop systems as well as a variety of automatic, semi-automatic and manual fixtures for precise mark positioning and consistent quality.

In addition to the above nameplate fixtures, we also offer rotary marking fixtures, multi-axis robots and fully customized fixtures to meet complex surface marking needs. We also have a wide range of marking solutions for industrial gases, HVAC and connectors and offer a range of standardized Cylinder Markers and Flange Markers as well as custom automated marking solutions.

Description

Technical data of our standardized benchtop pneumatic dot peen marking machines

Choose from our standard machines below and slide to the right for more information, or contact us for a solution.

Typical AppearanceMachine TypeWork AreaMarking SpeedMarking DepthControllerAir SupplyMarking Needle
Desktop140*80mm1~5cps or 5~100mm/s0.1~0.3mm for single write on steel, 1mm max or ask for customization.Thorx-6/Thorx-7/Kingmark-3/Kingmark-80.4~0.6MPa3mm V60 & 4mm V80 for standard, or custom needles for specialized purpose.
Desktop200*100mm
Desktop300*200mm
Desktop300*300mm
Desktop400*400mm or customized
Stand-alone140*80mm or customized
Enclosed140*80mm or customized

Choose control software on your marking demanding

Thorx-6 software is widely used in the pin marking industry with sufficient functions for the English environment, however, if you need more language support, check the table for the right one, or ask for advice.


Thorx-6
Thorx-7
Kingmark-3
Kingmark-8
UI LanguageEnglishEnglishAll languageAll language
Marking ContentEnglish fonts (letters & numbers), vector graphicsEnglish fonts & dot-fonts, vector graphics, Datamatrix (QR code)English fonts & dot-fonts, vector graphics, Datamatrix (QR code)All language fonts & dot-fonts, vector graphics, Datamatrix (QR code)
Font FormatSHX, SLF, TTF, SHP
Graphic FormatPLT, SLG, WMF, EMF, DWG, DXF
Controller ConfigurationTouchscreen controller or industrial PC controller with USB & RS232 connection.
Touchscreen Size7’’10.1’’

Marking Samples

Benchtop Pneumatic Dot Peen Engraver
Benchtop Pneumatic Dot Peen Engraver
Benchtop Pneumatic Dot Peen Engraver
Benchtop Pneumatic Dot Peen Engraver
Benchtop Pneumatic Dot Peen Engraver
Benchtop Pneumatic Dot Peen Engraver
Benchtop Pneumatic Dot Peen Engraver
Benchtop Pneumatic Dot Peen Engraver
Benchtop Pneumatic Dot Peen Engraver
Benchtop Pneumatic Dot Peen Engraver
Benchtop Pneumatic Dot Peen Engraver
Benchtop Pneumatic Dot Peen Engraver
Benchtop Pneumatic Dot Peen Engraver
Benchtop Pneumatic Dot Peen Engraver
Benchtop Pneumatic Dot Peen Engraver
Benchtop Pneumatic Dot Peen Engraver

Clients who chose our laser marking and engraving machines.

UV Laser Marking Machine Customer
UV Laser Marking Machine Customer
UV Laser Marking Machine Customer
UV Laser Marking Machine Customer
UV Laser Marking Machine Customer
UV Laser Marking Machine Customer
UV Laser Marking Machine Customer
UV Laser Marking Machine Customer
UV Laser Marking Machine Customer
UV Laser Marking Machine Customer
UV Laser Marking Machine Customer
UV Laser Marking Machine Customer
UV Laser Marking Machine Customer
UV Laser Marking Machine Customer
UV Laser Marking Machine Customer
UV Laser Marking Machine Customer

FAQs about our pneumatic dot peen marking machines.

There is no price here because the price depends on laser type, brand, model, working area, optional appearance, and more. Also, the cost of a machine will be affected by currency, raw material sheets, technology iteration of the laser source, and galvanometer. Therefore, contact us to get the real-time price to save your dollars or pennies.

The final dimension and weight of the machine and shipping package are influenced by detailed configuration, including laser source brand and model, machine appearance, galvanometer brand and model, chiller for water cooling method machines, etc. We develop and manufacture single machinery for each client for specialized demands and we recommend configuration based on the factors of useability, maintenance, shipping, workshop space available,

For all machines, we provide 2 years of online, video & live chat technology support, and we configure priority components brands, which are available to provide domestic repair & replacement service of laser source faults to maximize the usability of our customers.

We manufacture every single machine according to the specialized order, the standard machines take no more than 8 working days, and lite customized machines usually take 10~15 working days. Then the delivery based on air or sea takes 5~60 days.

Want an un art handing video demonstration on specialized material? Looking for a solution to your specialized environment or automatic process demand?